The anti-overspeed performance of the vehicle retarder is reflected by testing the high unit braking energy of the retarder. For the three-part reducer, the unit braking energy of the reducer design is h=0.12 (m/m), and in rainy days or oil-stained wheels, it will be reduced to the level of 0.10 and 0.03 (m/m) respectively. If the unit braking energy of the reducer with the brake beam installed in the new design is guaranteed to be greater than the design value of the reducer, the problem of overspeeding of the dump truck can be completely solved. The test method is to calculate the acceleration of the vehicle through the radar speed curve of the control system, and calculate the unit braking energy high.
Through systematic analysis of the causes of overspeeding and braking noise of the retarder, combined with laboratory and field tests to test the oil-water sensitivity and noise reduction performance of the materials, the composition, organization, structure and hardness of the test materials are constantly changed. And so on, * finally successfully developed the retarder anti-over and noise-reducing brake beam.
The anti-super noise reduction brake beam has low sensitivity to oil and water, and has obvious anti super effect. The unit braking energy is high and fully meets the design requirements, which effectively guarantees the safety of shunting operations.
Compared with ordinary brake rails, the noise reduction efficiency reaches 100%, of which more than 80% can reduce 20dB (decibel), the highest decibels are distributed below the frequency of 2kHz, and there is no sudden change in the decibels from 0 to 10kHz, no more The harsh screaming noise with high sound pressure level greatly improves the noise environment around the marshalling yard, which is beneficial to the physical and mental health of the operators. During a major repair period, there is no need to replace the brake beam, only the segmented composite brake pads need to be replaced, and the total cost is low. Moreover, the splint is light in weight and easy to replace. By adjusting the composition, organization, structure and hardness of the brake splint material, the inner brake splint of the target brake position reducer can be used for 5 to 8 years, and the outer brake splint can be used for 3 to 5 years, which can meet the requirements of use.
For automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：Calculation of high unit braking energy of vehicle retarder
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank
