-------------------------------------------------------------------
Email: sales@shunlongwei.com
CM20MD1-12H Description
Powerex CI Modules are designed for use in switching applications. Each module consists of a three phase diode converter section and a three phase IGBT inverter section. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management.
Features:
.Low Drive Power □ Low VCE(sat)
.Discrete Super-Fast Recovery (70ns) Free-Wheel Diodes
.High Frequency Operation (20-25 kHz)
.Isolated Baseplate for Easy Heat Sinking
Applications:
.AC Motor Control □ Motion/Servo Control
.General Purpose Inverters
.Robotics
Ordering Information:
Example: Select the complete nine digit module part number you desire from the table below - i.e.
CM20MD1-12H is a 600V (VCES), 20 Ampere CI Power Module.
Power Device Junction Temperature Tj -40 to 150 °C
Storage Temperature Tstg -40 to 125 °C
Mounting Torque, M4 Mounting Screws 13 in-lb
Module Weight (Typical) 60 Grams
Isolation Voltage, AC 1 minute, 60Hz VRMS 2500 Volts
Repetitive Peak Reverse Voltage VRRM 800 Volts
Recommended AC Input Voltage Ea 220 Volts
DC Output Current IO 20 Amperes
Surge (Non-repetitive) Forward Current IFSM 300 Amperes
Collector-Emitter Voltage (G-E Short) VCES 600 Volts
Gate-Emitter Voltage (C-E Short) VGES ±20 Volts
Collector Current IC 20 Amperes
Collector Current (Pulse)* ICM 40 Amperes
Emitter Current** IE 20 Amperes
Emitter Current** (Pulse)* IEM 40 Amperes
Maximum Collector Dissipation PC 57 Watts
Three Phase Converter + Three Phase Inverter 20A/600V