Measure tire pressure
The tire measures every inch of the journey with its own body, which is extremely hard.Therefore, the tire pressure should be measured first to maintain the same tire pressure for all four wheels.If the tire pressure of a certain tire is abnormally low, carefully observe whether the tire is punctured, and repair it in time.If the wound is too large or the wound appears on the wall of the fetus, it can only be asked to retire.
There is also the problem of tire dynamic balance.The rough road in the wild may affect the dynamic balance of the tires. The originally smooth car suddenly seems to lose its temper, with abnormal tremors, which indicates that the dynamic balance of the tires has failed.The reason may be the deformation of the wheel hub, tire wear, or it may be that the balance weight clamped on the wheel hub was shaken off during a strong bump. Therefore, it is extremely necessary to rebalance each tire.
Oil change
During a self-driving trip, high-load operation will make the engine stand the test, so check the engine oil and water tank water.If it is an automatic transmission car, also check whether the transmission oil is missing, and if it is excessively consumed, it should be refilled in time.
If the self-driving trip is relatively long, it is best to change the engine oil, because the engine’s high temperature work for several days may cause the engine oil to deteriorate.And whether the engine belt is loose also needs attention.In addition, the dust during the journey may make the engine body, engine radiator and air-conditioning radiator covered with mud, which affects the engine’s heat dissipation and air-conditioning work. At this time, you need to go to a professional car dealer and use a special cleaning agent to treat the engine and radiator. Carry out special cleaning.
Do 4-wheel alignment
The bumpy road brings continuous impact to the chassis, and the four-wheel positioning of the vehicle may also be changed as a result, resulting in abnormal tire wear.Therefore, after returning from the journey, the chassis of the vehicle should also be checked, and if necessary, the four-wheel alignment should be done again for the car.Similarly, severe vibration can damage the steering system, and you should observe whether the steering gear ball head is loose.In addition, the screws of the chassis part should be tightened.
Check the brake system
The brake system is also an inspection link that cannot be ignored. Frequent braking and gravel-filled environments during the journey will severely wear the brakes.If the brakes are excessively worn, or there is a “hissing” noise when you step on the brakes, then the brakes need to be checked.
Clean the engine oil circuit
There are certain differences in the quality of oil in various regions, and even some of the oil quality is unqualified. Adding such oil will cause great damage to the engine and the oil circuit.If you use inferior gasoline, on the one hand, the engine will produce knocking and noise; on the other hand, it is easy to make the three-way catalytic converter fail. At this time, the engine will often be weak and fuel consumption will increase, which will seriously damage the internal parts of the engine.If the above situation occurs, it is best to go to the after-sales service station to drain the oil, and then add some additives to clean the oil circuit for maintenance.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article:Introduction to 5 key points of car maintenance
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank